Pulsar TELOS - Page 65

To turn on and off the  PiP function see the PiP Mode section .
Rotate the adjustment ring  4  to change the magnification ratio in the  PiP 
The zoomed image is displayed in a dedicated window , while the image in the rest
of the screen is displayed at base magnification 2.5 x .
When the  PiP  is turned on you can control both the discrete and smooth digital
zoom . In this case the zoom value changes only take place in the dedicated
window .
When the  PiP  function is turned off , the screen will display at the magnification that
was set in  PiP  mode .
Display-O Function