Pulsar TELOS - Page 70

In this mode , a PC / laptop is used as an external power supply . The status bar
shows the icon  . The device continues operating and all functions are
available .
Battery recharge feasibility depends on your computer ʼ s USB port .
When the USB is disconnected from the device when in the  Power  mode , the device
keeps operating with the Battery Pack if it is available and sufficiently charged .
Memory Card ( external memory )
In this mode the device is detected by the computer as a flash card . This mode is
designed for work with the files saved in the device ʼ s memory . The device ʼ s
functions are not available in this mode ; the device turns off automatically .
If video recording was in progress when the connection was made , recording stops
and the video is saved .
If the device is in  Memory Card  mode and is disconnected from USB , the device
will remain on .
Software
Stream Vision 2