Pulsar TELOS - Page 72

Firmware Update
 Download the free Stream Vision 2 App in Google Play or App Store .
 Connect your Pulsar device to your mobile device ( smartphone or tablet ).
 Launch Stream Vision 2 and go to section “ Settings ”.
 Select your Pulsar device and press “ Check firmware update ”.
 Wait for the update to download and install . Pulsar device will reboot and will be
ready to operate .
Important :
if your Pulsar device is connected to a phone or mobile device , please turn on
mobile data transfer  GPRS /3 G /4 G  to download update ;
if your Pulsar device is not connected to your phone or mobile device but is already
listed in “ Settings ” > “ My devices ” section , you may use Wi - Fi to download update .
Find answers to frequently asked questions about using Stream Vision 2 here .
Is your firmware up to date ?
Click  here to check the latest firmware for your device .
Maintenance
Technical Inspection