20
and the hour digits (and “A”/“P” mark if the time is set in the
12-hour indication) start flashing.
3. Depress button “C” to select the digits to be adjusted (flashing).
Hour Minutes
→
4. Depress button “D” to set the digits. One digit is advanced
with each depression of the button. The digits move quickly
by keeping the button depressed.
5. After all the adjustments are completed, depress button “B”
to return to the alarm display.
The alarm mark and “on” mark are automatically displayed.
Notes:
1. When the time function is displayed in the 24-hour indication,
the alarm is also displayed in the 24-hour indication.
2. When setting the hour digits in the 12-hour indication, check
that “A”(AM)/“P”(PM) mark is properly set. In the 24-hour
indication, there is no indication.
3. If the watch is left untouched in the alarm setting display with
the digits flashing, it will automatically return to the alarm
display in 2 to 3 minutes.
↑
To Next Page
Loading...
