Declaration of Conformity
Control display remains blank
Poor contrast adjustment
Blown fuse in machine.
Control panel failed. Replace fuse.
Display screen is not clear,
flickers or areas appear faint
Adjust contrast. (Refer to
console user manual)
Heart rate monitor not
working
Monitor strip not fitted
correctly. Failed battery
Adjust position of strip and/or
moisten electrodes. (Refer to
console user manual).
Replace monitor strip.
280F-ST ‘Extreme’ Elliptical Trainer
Fault
Probable Cause
Cure
EC Declaration of Conformity Standards Route to Compliance
Directive
Low Voltage Directive
73/23/EEC
EMC Directive
89/336/EEC
Low Voltage Directive
73/23/EEC
Test Name
Safety requirements for
mains operated electronic
and related apparatus for
household and similar use
Generic Emissions
Generic Immunity
Specification for safety of
household and similar
electrical appliances
Standard
EN60065
EN50081-1
EN50082-1
EN60335-1
Year
1998
1994
1998
1995
and therefore is in conformity with the production requirements of council directives 73/23/EEC and 89/336/EEC
on the approximation of laws of the member states relating to Electrical Safety and Electromagnetic compatibility.
16
15
Technical manual
Technical manual
Troubleshooting
To Next Page
Loading...