Troubleshooting
Control display remains blank
Poor contrast adjustment
Blown fuse in machine.
Control panel failed.
Replace fuse.
Display screen is not clear,
flickers or areas appear faint
Adjust contrast. (Refer to
console user manual)
Heart rate monitor not
working
Monitor strip not fitted
correctly. Failed battery
Adjust position of strip and/or
moisten electrodes. (Refer to
console user manual).
Replace monitor strip.
260FT ‘Ascent’ Low Impact Treadmill
Fault
Probable Cause
Cure
Running belt does not run
centrally on machine, or slips
Actuator not calibrated.
3.15 Amp fuse blown.
Wrong tension on belt.
Machine not level.
Adjust tension of belt or
adjust feet to level machine.
(Refer to technical manual)
Elevation does not function
correctly.
Elevation locks and does not
move.
Contact engineer.
Replace 3.15 Amp fuse in
P.S.U
Belt does not run
Emergency stop button
activated.
Release emergency stop
button on right hand handle
bar.
14
Technical manual
To Next Page
Loading...