EasyManua.ls Logo

pumpa PC-58 - Safety; Summary of Important Warnings; Product Specifications

pumpa PC-58
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
EN
20
2 Safety
Control elements such as sensors and switches may only be installed and repaired by persons
designated for this work by the user, who are suitably qualified and instructed in the operating
conditions and principles of occupational safety.
2.1 Summary of the important warnings
Voltage connection according to nameplate data.
Ensure that interventions in electrical equipment, including connection to the mains, are carried out
only by a person with professional competence in electrical engineering in accordance with decree.
All screw connections must be properly tightened and secured against loosening.
The equipment must not be moved when it is live.
In case of any unexpected event, disconnect the sensor from the power supply (broken cable
insulation, etc...).
Check the electrical system and the protection before switching on.
Protect electrical and mechanical hazard areas from access.
3 Specifications
Rated voltage: 220-240 V
Protection: IP65
Maximum power: 1.1 kW
Maximum current: 10 A
Frequency: 50/60 Hz
Minimum differential pressure: 0.3 bar
Maximum differential pressure: 9.3 bar
Maximum working pressure: 9.8 bar
Switch-off pressure: 0.8-9.8 bar
Switch-on pressure: 0.5-6 bar
Maximum ambient temperature: 40 °C
Maximum liquid temperature: 60 °C
Connection: 2XG1"
4 Features
The PC-58 unit is a digital pressure control for water pumps. It starts and stops the pump according
to the detected data of water flow in the pipe and water pressure. It completely replaces the
traditional pump control system, which consists of a pressure tank, pressure switch, water shortage
protection device, check valve, etc. The electrical components are completely isolated by piping and a highly
sealed control box, which increases the safety of the unit beyond comparison with the traditional safety
system. The integrated design helps you save time and material. Compared with traditional electric pressure
control, this product has the following important features:
1. It has a new pressure sensor technology, thanks to the digital display, the unit can display the pressure
in the pipe in real time.

Related product manuals