pumpa PC-58 - Functions Explanation

EN
23
6 Explanation of functions
Č.:
Name:
Description:
1
LED status light
1. When the indicator lights up continuously for a long time, the pump
is in operation.
2. When the indicator does not light, the pump has stopped working.
3. When the indicator flashes, there is insufficient water in the pump.
2
Mode 2
1. If the indicator lights up continuously for a long time, the pump is in
the precision control mode.
2. In this mode, it is possible to adjust the on and off pressure.
3
Mode 1
1. If the indicator lights up continuously for a long time, the pump is in
normal control mode.
2. In this mode, the switch-on pressure can be adjusted.
4
Power
The indicator lights up when power is connected .
5
Display
1. Real-time pressure
2. Switch-on pressure
3. Switch-off pressure
4. Mode 1
5. Mode 2
6. Over-pressure protection
7. Cyclic start protection
6
Up
Switching modes or increasing pressure
7
Function
Mode and pressure settings
8
Reset
Restart the pump at any time
9
Down
Switching modes or reducing pressure