Need help?Do you have a question about the Pumpex K 200 and is the answer not in the manual?
General| Maximum liquid temperature | 35 °C |
|---|---|
| Voltage | 400 V |
| Weight | 5.5 kg |
| Frequency | 50 Hz |
| Pump type | Submersible |
Adherence to service instructions and use of appropriate tools when working on the pump.
Key points for efficient operation and reduced environmental impact, focusing on pump selection and maintenance.
Ensures all parts are checked and in perfect condition before reassembly for proper function and longevity.
Emphasizes that pump and electrical cables must be disconnected by a qualified electrician before service.
Procedure for safely lifting and cleaning the pump from its installation site.
Steps to detach the motor unit from the pump volute using latch bolts.
Wiring configurations for direct on-line starting of pumps, showing connections for Y and Delta.
Wiring diagram for star/delta starting configurations, illustrating Y/Δ connections.
Table detailing torque values for various bolt sizes (M6 to M16) and specific impeller/latch bolts.
Guidance on tightening the cable gland, specifying a snug fit plus one full rotation.
To Next Page
