EasyManua.ls Logo

Puqpress M2 - Page 3

Puqpress M2
8 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
3
• Cleaning and user maintenance shall not

• 
PUQpress itself into water or other

• Always switch off the PUQpress before
performing maintenance or cleaning on

injury.
• 
before performing maintenance or

electric shock, or injury.
• Always unplug the PUQpress from the
power source and other equipment if

or injury.
• 
cable or plug is damaged. Any required
repairs may only be conducted by

reason, please contact a customer

Using the PUQpress if the PUQpress,
cable or plug is damaged may result in
electric shock, or injury.
6
CAUTION
• Always handle the coffee grinder with
two people with care. Not doing so may
result in the coffee grinder getting
damaged.
• Always adjust the lower clamp before
use. Not doing so results in exposure of

• 
between the PUQpress base and lower
clamp. Risk to pinch.
• 
alterations to the PUQpress. The
manufacturer holds no liability for
damages resulting from failure to

• 
bumping. Not doing so results in the
PUQpress getting damaged.
• 
cable. Always grasp the plug and pull.
• 

• 
wet conditions.
• 

• Make sure to guide the cables through

bottom. Not doing so may result in the
cables getting damaged.
• Make sure not to use a damp/wet cloth to
clean the tamper base. Grounded coffee
will stick to the tamper base.

Other manuals for Puqpress M2

Related product manuals