Before first use
Note: This air purifier comes with all filters fitted inside, but the packaging of the filters
needs to be removed before using the air purifier.
1. Carefully remove your air purifier from the box and cloth ‘travel’ bag.
2. Select a firm, level and flat location for the air purifier.
*For proper air flow, locate the air purifier at least 1 foot from any wall or furniture.
*Make sure none of the grills are blocked.
3. Before using, remove the filters, unpack them and fit them back at the original place.
4. Plug the power cord into the correct voltage AC outlet.
IMPORTANT: When moving the air purifier, always lift the air purifier by the carrying
handle located on the back.
Purification system
Improve your indoor air quality with your new Purafide Air Purifier. Multiple levels of
cleaning include a combination H13 HEPA filter that captures allergens, and Activated
Carbon filter to remove odors. UV-C light technology enhances germ-killing.
Washable Pre-filter: Trapping big particles like human hair, pet hair and bird feather etc.,
help extend life of HEPA and Activated Carbon filter.
HEPA filter: The high-performance H13 HEPA filter is over 99.97 % efficient in trapping
all allergens and airborne contaminants down to 0.1 micron in size such as: dust, mold
spores, plant spores, pet dander, pollen etc..
Activated Carbon filter: The activated carbon filter reduces the toxic fumes, foul odors
and other VOCs effectively.
UV-C: UV Light (254NM) destroys microorganisms such as germs, viruses, bacteria and
fungi (such as mold toxins).
Ion (on/off): Negative ion improves the air quality by combining with dust or reacting with
odor molecules attached on the wall. Plenty of negative ions exist in natural
surroundings such as waterfalls or forests. In this mode, negative ions bring the room
air close to this natural environment.
Clea
To Next Page
Loading...