▲Pre-filter maintenance
-The pre-filter is detachable from the main filter assembly. Itcan be removed and washed
with water. It can also be vacuumed if preferred. If washed, please ensure that it is
completely dry before placing it back on. Pre-filter should be cleaned at least once a
month to extend the life of the HEPA filter.
-Do Not use a sharp object to clean the pre-filter, it can cause damage.
UV Lamp Replacement
(UV model: ZL09150W-Z)
Open the UV lamp cover with a screwdriver only when replacement is needed.
1. IMPORTANT: Unplug the air purifier. Never work with the UV light while it is turned
on.
2. Grasp the wire connector and gently unplug it, removing the UV bulb from the air
purifier.
3. Install the new UV lamp and re-attach the cover.
Note: Do not look directly at the operating UV lamp when it is turned on.
Maintenance Caution
To Next Page
Loading...
