Need help?Do you have a question about the Purafil ONGUARD SMART and is the answer not in the manual?
Instructions for physically mounting the OnGuard unit onto a vertical surface.
Explains the purpose and process of calibrating the 4-20 mA output circuits.
Steps required before performing the 4-20 mA calibration, including power and ammeter connections.
How to select the specific channel (1-4) for calibration.
How to select whether to calibrate the minimum (4mA) or maximum (20mA) output.
Using keys to adjust the current up or down for calibration.
Defines the step size for adjustments using arrow keys.
How to save the calibration adjustments made for each channel.
Step-by-step instructions for performing the 4-20 mA calibration for each channel.
To Next Page
General