PURE Contour D1 Manual

13
ES
EN
DR
DR
DAILY
DR
LAST USE
DR
DR
DIGITAL
DR
DR
ON
Alarms and timers
Contour features two alarms and a sleep timer.
Setting an alarm
You can set an alarm to sound a tone, tune to a radio station or play a track from your
iPod/iPhone.
Press the Alarm button on the remote to show the status of Alarm
1, press
or to show the status of Alarm 2.
Press the Select button to choose and adjust either alarm and
press
or and Select to adjust the following settings:
Alarm on/off
Press or to choose between ‘ON’ (alarm sounds) or ‘OFF’
(alarm does not sound) and press Select.
Time
Set the alarm time. Press or to adjust the hours then press
Select. Repeat to set the minutes then press Select.
Days
Set the days that the alarm sounds. Press or to choose
between: DAILY (every day), ONCE (no repeat), WEEKENDS or
WEEKDAYS (Monday to Friday) then press Select.
Type
Press or to choose between: DIGITAL, FM, IPOD or TONE
(buzzer).
Station
If you’ve set alarm mode as DIGITAL or FM, press or to
choose between: LAST USED (Last station tuned to) or select a
favourite if you have any saved.
Note: NO PRESETS is displayed if you have not created any
favourites.
Volume
Press or to change the alarm volume then press Select.
You see the message ‘SAVED’ once you have completed all the
alarm settings.
The
1
and
2
icons on the screen indicate when an alarm is set.
SAVED
1

PURE Contour D1 Specifications

General

Brand	PURE
Model	Contour D1
Category	Docking Station
Language	English