PURE Contour D1 - Getting Started; Setting up

4
Getting started
Setting up
Push the right hand
end of the front panel
to release the dock.
2
Insert the adaptor
(lightning (A) or 30 pin
(B)) that corresponds
to your iPod/iPhone/
iPad into the connector
socket (C) as shown on
the following page.
3
(A)
(B)
(C)
Pull the plastic tab
from the remote
control battery
compartment and
remove the protective
film from remote
buttons.
1
2
Contour_D1_Bluetooth-v2_Euro.indb 4 9/18/2015 11:06:05 AM