PURE Electric Vehicle
PuR Energy Pvt Ltd |13
Charging your Li-ion Battery
• Ensure location for charging the battery must be dry, clean, safe and dustproof.
• Do not place the charger on the battery.
• Connect input mains supply plug to the 230V/50hz supply wall socket with proper grounding.
• Make sure earth is connected.
• Connect the charger output cable with connector (DC Output) to the battery make connector.
Precautions while charging the battery
• The phenomenon of sparking is normal when it connects to the battery because of the high
current. This charger is designed for charging lithium type batteries ONLY.
• Avoid charging the wrong type of battery.
• The battery may be damaged if LED2 does not change to green even after charging for a
long time.
• Always place the charger in well-ventilated and dry environments.
• The charger is designed with aluminum case as its heat sink. Do not cover it to avoid the case
from being overheated while charging.
• Do not disassemble charger. Take it to a qualified service person when service or repair is
required.
In case the output cable in the charging socket is not connected properly LED glows green, to ensure
proper connection
To Next Page
Loading...
