T
turnerhollyJul 27, 2025
What to do if my PURE Adapter displays 'ANTENNA CONNECTING'?
- MMrs. Tina Quinn MDJul 27, 2025
If your PURE Adapter displays 'ANTENNA CONNECTING' or 'CHECK POWER TO ANTENNA', it indicates that the antenna isn't connected to the power supply or the controller isn't paired correctly. Here's what you can do: * First, remove the power adapter from the 12V socket and then re-insert it. If the antenna is receiving power, its status light will illuminate for 5 seconds, and the controller should connect within 30 seconds. * If this doesn't work, you may need to pair the controller with the antenna. Use a paperclip to press the reset button on the antenna until the status light flashes slowly. Then, place the controller within 50cm of the antenna, and press and hold the specified buttons together. If it still doesn't connect after 30 seconds, repeat the pairing steps.