20
Speakers 4 x Mylar ¾" high frequency drivers, 1 x
Neodymium motor upward firing 3.5" mid/
bass driver
Audio output 4 x 2.5W + 10W RMS
Input connectors
9V DC power adaptor socket (110-230V
supplied), ChargePAK connector, 3.5mm
line-in for auxiliary devices. USB for product
upgrades, Bluetooth (dongle supplied) and
Ethernet connectivity (optional adapter
available).
Controls Power, Vol+, Vol-, Mute, Audio profile, Wi-Fi
setup, Reset.
Display 1" LCD display.
Network Wi-Fi: 802.11b and 802.11g supported
with WEP and WPA/WPA2.
Ethernet (requires optional adapter): 10/100
Mbps.
Bluetooth: A2DP supported via supplied USB
dongle.
Codec support Includes WMA (Standard V9), AAC, MP3, MP2
Mains power supply
Adapter:
Input AC 100-240V, 50/60Hz, 0.5A;
Output DC9V, 1500mA
Main unit: DC9V, 1500mA.
Battery ChargePAK F1 (supplied).
Dimensions 131 mm wide x 139 mm deep x 135 mm high
Weight 1.25 kg with ChargePAK, 1.0 kg without
ChargePAK
Approvals CE marked. Compliant with the EMC and
Low Voltage Directives (2004/108/EC and
2006/95/EC). ETSI EN 300 401 compliant.
Australian C-Tick N1600 and Electrical Safety.
Hereby, Pure declares that this Band II LPD
device is in compliance with the essential
requirements and other provisions of the
Directive 1999/5/EC. Please go to
www.pure.com for the full Declaration of
Conformity.
Technical specifications
To Next Page
