PURE Jongo T2 - Technical Specifications; Jongo T2 Specifications

Speakers 2 full-range 3" drive units
Audio output 2 x 10W RMS
Input connectors 15V DC power adaptor socket (110-230V supplied), 3.5mm
line-in for auxiliary devices.USB A for product upgrades and
Ethernet connectivity (optional adapter available)
Controls Power, Vol+, Vol-, Mute, Wi-Fi setup, Reset
Network Wi-Fi: 802.11b and 802.11g supported with WEP and
WPA/WPA2
Ethernet (requires optional adapter): 10/100 Mbps
Bluetooth: A2DP supported
Codec support Includes WMA (Standard V9), AAC, MP3, MP2
Mains power supply
Adapter:
Input 100-230V AC, 50/60Hz, 0.5A;
Output 15V DC, 1500mA
Main unit: 15V DC, 1500mA
Dimensions 9.8" (250 mm) wide x 4.7" (120 mm) deep x 5.9" (150 mm)
high
Weight
2.7 lbs (1.104 kg)
Approvals CE marked. Hereby, Pure, declares that this Band II LPD
device is in compliance with the essential requirements
and other relevant provisions of Directive 1999/5/EC. The
Declaration of Conformity may be consulted at:
http://www.pure.com/R&TTE-DoC
Australian C-Tick N1600 and Electrical Safety
Technical specifications
Jongo T2
EN
11
Jongo_T2_T4_QSG-Bear-US-v1.indb 11 9/2/2014 11:32:19 AM