PURE Jongo T2 User Manual

Jongo T4
Speakers 2 full-range 3" drive units
Audio output 2 x 25W RMS
Input connectors 18V DC power adaptor socket (110-230V supplied), 3.5mm
line-in for auxiliary devices. USB Type A for product updates
and Ethernet connectivity (optional adapter available)
Controls Power, Vol+, Vol-, Mute, Wi-Fi setup, Reset
Network Wi-Fi: 802.11b and 802.11g supported with WEP and
WPA/WPA2
Ethernet (requires optional adapter): 10/100 Mbps
Bluetooth: A2DP supported
Codec support Includes WMA (Standard V9), AAC, MP3, MP2
Mains power supply
Adapter:
Input 100-240~V AC, 50/60Hz, 1.6 A;
Output 18V DC, 3.61A
Main unit: 18V DC, 3.61A
Dimensions 12" (305 mm) wide x 5.7" (146 mm) deep x
6.89" (165 mm) high
Weight 6.6 lbs (3 kg)
Approvals CE marked. Hereby, Pure, declares that this Band II LPD
device is in compliance with the essential requirements
and other relevant provisions of Directive 1999/5/EC. The
Declaration of Conformity may be consulted at:
http://www.pure.com/R&TTE-DoC
Australian C-Tick N1600 and Electrical Safety
12
Jongo_T2_T4_QSG-Bear-US-v1.indb 12 9/2/2014 11:32:19 AM

PURE Jongo T2 Specifications

General

Speaker type	2-way
Number of drivers	-
Number of speakers	1
Audio output channels	1.0 channels
Certification	CE, US FCC/ETL, C-Tick. ETSI EN 300 401
Recommended usage	Mobile phone / Smartphone
Impedance	- Ω
Frequency range	- Hz
RMS rated power	- W
Product type	Mono portable speaker
Product color	Black, White
AUX in	Yes
Bluetooth profiles	A2DP
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Connectivity technology	Wired & Wireless
Power source type	DC
AC adapter input voltage	100 - 240 V

Weight and Dimensions

Depth	120 mm
Width	250 mm
Height	150 mm
Weight	1104 g