Need help?Do you have a question about the PURE Marshall Evoke-1 XT and is the answer not in the manual?
Scan UK Band III or full digital frequencies by pressing and holding.
Set a countdown timer with an audible alarm for a specified duration.
Store or recall favourite stations using numbered presets.
Connect the mains adapter to the 9V DC power socket.
Connect the supplied or external aerial via F-type connector.
Extend aerial, connect power adapter, and plug in.
Initiate Autotune to find and tune to available stations.
Turn Tune knob to browse and select available stations.
Configure daily alarms with radio or tone options and set time.
Essential safety instructions for using the radio, including water and heat warnings.
Scan UK Band III or full digital frequencies by pressing and holding.
Set a countdown timer with an audible alarm for a specified duration.
Store or recall favourite stations using numbered presets.
Connect the mains adapter to the 9V DC power socket.
Connect the supplied or external aerial via F-type connector.
Extend aerial, connect power adapter, and plug in.
Initiate Autotune to find and tune to available stations.
Turn Tune knob to browse and select available stations.
Configure daily alarms with radio or tone options and set time.
Essential safety instructions for using the radio, including water and heat warnings.
General| DAB Support | Yes |
|---|---|
| FM Support | Yes |
| DAB Band | Band III |
| Speaker | 3" full range driver |
| Power Supply | Mains powered |
| Display | LCD with backlight |
| Connectivity | 3.5mm headphone jack |
| Presets | 10 DAB, 10 FM |
| Frequency Range | FM 87.5-108 MHz |
To Next Page
