14
Digital radio settings
Autotune
You can use the autotune function to automatically scan for new digital radio
stations and remove inactive ones.
Note: Autotune is only available when you have selected ‘Digital radio’ as the
radio source.
To carry out an autotune:
1. Press the Menu button.
2. Scroll < > to ‘AUTOTUNE’ and press the Select button.
The number of stations
found will be displayed during the autotune.
When the autotune has finished, One Midi will tune to the last station that you
were listening to.
Audio settings
Adjusting the bass and treble
One Midi features two bass and treble profiles that automatically adjust the bass
and treble levels based on whether you are listening to One Midi via its internal
speaker or connected headphones.
Note: You will need to connect headphones to One Midi to adjust the bass and
treble level when listening via headphones. To adjust the bass and treble levels
of the internal speaker, remove any connected headphones before adjusting the
bass and treble.
To adjust One Midi’s bass and treble settings:
1. Press the Menu button.
2. Scroll < > to ‘AUDIO’ and press the Select button.
3. Scroll < > to ‘BASS’ or ‘TREBLE’ and press the Select button.
4. Scroll < > to adjust the bass or treble levels. You can choose a level between
‘-5’ and ‘+5’.
5. Press the Select button to confirm the bass or treble level.
To Next Page
Loading...
Need help?
General
