Owner’s Manual High Voltage Batteries 43
Battery Introduction
Your PURE EV may be equipped from the factory with
sealed AGM or Lithium batteries. Neither AGM nor
Lithium batteries require the addition of ANY water.
Please identify your battery type by looking under
the seat. You will find one of the following battery
configurations:
For Lithium:
Reach out to the PURE EV hotline: 1(866)426-6380 or
reach out to your local dealer.
Installation, removal, and maintanance of lithium
batteries should only be conducted by an authorized
PURE EV service professional.
*Viewed from driver side of
vehicle
01. Remove negative battery
cable.
02. Remove positive battery
cable.
03. Connect +battery cable first
followed by -battery cable.
*Viewed from driver side of
vehicle
01. Remove negative battery
cable.
02. Remove positive battery
cable.
03. Connect +battery cable first
followed by -battery cable.
Battery Cable Removal -
AGM Electric Vehicle
Battery Configuration
Battery Cable Removal -
Gasoline
Battery Disconnection
To Next Page
Loading...