• Remove/forget the speaker from the list of paired devices on your
mobile/controlling device, then go through the setup process again.
• Ensure your mobile/controlling device are within Bluetooth connection range.
• Restart your mobile device.
Q. When listening to radio, StreamR experiences audio drop-outs and
sometimes no audio at all. What should I do?
A. If you are experience radio reception related issues, it might be worth trying
the following:
• Check the radio coverage in your area.
• Fully extend the auxiliary cable.
• Press the Autotune button on the rear of the speaker.
Q. How do I remove stations which are stored as preset corners?
A. You can either overwrite any existing stations with new ones or to remove
these completely, you'll need to restore your StreamR to factory conditions.
This will clear all settings. as well as saved presets.
Note : Your StreamR needs to be running on battery mode to restore it to
factory conditions.
To restore your StreamR to factory conditions:
1. Disconnect the USB charging cable and close the speaker.
2. Press and hold the Autotune button (at the rear).
3. While holding down the Autotune button, press down on the top of the
speaker to switch it on.
Do not switch off your StreamR while the restore is in progress. When the
restore is complete, the language selection is shown on the display.
To Previous Page
Loading...
