15
Installation (cont.)
Impact 6 cases are fitted with permanent castors for pushing case(s)
into final position. Feet should be wound down upon final positioning
of case (see note on levelling) with an adjustable wrench
Case Positioning & Levelling for Final Positioning
STEP SIX
Lay the case side by side, Levelling the feet , bring the two case together
and close any gaps.
STEP NINE
Case to case fixing kit required
(supplied within case)
Includes bolts, nuts and washers
for case to case bolting. Canopy
cover strip. Foam tape, mastic
and sealants are also provided
for sealing cases in a line-up.
Pure Cold Impact 6 Installation,
Operation & Maintenance Manual
To Next Page
Loading...