Pureit EXCELLA - Page 9

7
SETTING UP PUREIT EXCELLA
Place the Top Chamber on the Cleansing Collection
Chamber, then place Sediment Filter in the Top
Cover and place it on the Top Chamber.
Pour in water till the top of the Top Chamber and drain
out all the water that collects in the Transparent Chamber.
Place the lid on the Top Cover. Pureit Excella is now ready
for use from second cycle onwards.
7 8
After tting the Microcharged Membrane Assembly to the Cleansing Collection Chamber,
do not rest the assembly on a at surface.
Please note that the rst cycle will not give full 9L of water in the Transparent Chamber
since some water gets stored in the Cleansing Collection Chamber and the Top Chamber.
Now place the Cleansing Collection Chamber
on the Transparent Chamber.
Insert the Microcharged Membrane Assembly at
the base of the Cleansing Collection Chamber.
Twist in clockwise direction to t.
5 6