What to do if my PureMate PM 906 has a strange odor?
If your PureMate Humidifier emits a strange odor, it could be due to a new machine, dirty water, or stagnant water. If it is a new machine, remove the water tank, unscrew the lid, and let it air out in a cool area for 12 hours. If the water is dirty or stagnant, clean the water tank and refill it with clean water.
Why is my PureMate PM 906 making abnormal noise?
Abnormal noise from your PureMate Humidifier can be caused by a vibration in the water tank because the water level is too low, or because the machine is on an unstable surface. To resolve this, fill the water tank or move the unit to a stable, flat surface.
What to do if the PureMate Humidifier power light is on but no mist?
If the power light is on but no mist is being produced, the water tank is likely empty. Fill the water tank with water.
What to do if the PureMate PM 906 power light is on, but the machine doesn’t work?
If the power light is on, but the machine isn’t working, there might be too much water in the water basin. Remove the water tank, take a small cup and remove some of the water from the machine’s water basin, then reinsert the water tank, ensuring it sits properly.
How to fix low spray mist volume on a PureMate Humidifier?
A low spray mist volume in your PureMate Humidifier may be due to too much mineral scale in the water basin or dirty/stagnant water. Clean the transducer, clean the water tank, and refill with clean water.
Why is the PureMate PM 906 Humidifier power icon off or not working?
If the power icon on your PureMate Humidifier is off or not working, the humidifier is likely not plugged into the power outlet. Connect the power cord to the electrical outlet and press the power button.
What to do if spray mist is coming out of the area around the jets of PureMate Humidifier?
If spray mist is coming out of the area around the jets of your PureMate Humidifier, it may be caused by gaps between the housing around jet nozzles and the top of the water tank. To fix this, dip the nozzle in water for a while, clean it with a damp cloth, and put it back to the tank.
Instructions for safe operation, preventing injuries and device damage, including handling, voltage, and environment.
Warnings against touching transducer, using foreign objects, submerging, harsh detergents, and covering the unit.
Steps for preparing the humidifier, filling water, connecting power, and basic operation of mist, ionizer, and heating.
Addresses problems like no power, no mist, strange odors, low mist volume, and abnormal noise with possible causes and fixes.
General| Model | PM 906 |
|---|---|
| Category | Humidifier |
| Type | Ultrasonic |
| Mist Output | 300ml/h |
| Operating Voltage | 220-240V |
| Frequency | 50/60Hz |
| Coverage Area | Up to 30m² |
| Noise Level | ≤ 35 dB |
| Features | Adjustable mist output, auto shut-off |
To Next Page
