What Do I Need?
This kit includes everything that you will need to successfully upgrade your system with an RO Booster
Pump.
Useful Tools
•
RO Tube Cutters or a Utility Knife
Before You Get Started
You will need to locate an area that you can mount the PurePro HF-8367 RO Booster Pump.
The mounting plate which comes preinstalled on the booster pump features rubber vibration
absorbing rubber feet. It is important that it is mounted using these feet to reduce vibration and
noise.
As the booster pump and associated components are electrical devices, they are only suitable for
indoor use. Please ensure they are not exposed to liquid or used outdoors.
IMPORTANT: Do not run the booster pump for periods greater than 3 hours. Doing so can
cause serious and permanent damage to the pump. Allow a rest period of 1 hour between
uses.
To Next Page
Loading...