14
Main Specifications
Processing rate of water 2./minute:
2
[In-water pressure is 0.1Mpa(about 1kgf/cm )]
Water Exit Volume 3L/minue:
2
[In-water pressure is 0.2Mpa(about 2kgf/cm )](estimate)
Electrolysis Capacity Level: Alkaline 3 level; Acidic 1 level
Possible Contnuous Electrolysis Duration:
(Level 1~2) about 1 hours (Level 3) about 30
Plate cleaning automatically performs every time being used.
When intensive cleaning is required after a period of time,
Intense cleaning indicator is on.
Automatic back cleaning when tap water is closed after
processing.
0
40 C
Power Supply
AC: 220V/50HZ(customized product)110V/60HZ
About 320W(max)
Nanometer Titanium Alloys Electrolysis Trough
Power Consumption
Electrolysis Material
In-Water Pressure
2
1~6.5kg/cm
Electrolysis Technique
Continuous Electrolysis Technique (water volume and
temperature gauge built-in)
Machine Protection
Installation
Fuse 10Aand electrical board: 2A electrical power
overheating protection installed, transformer temperature
protection installed.
Electrolysis
MainMachine
Dimension
Height 310mm x Width 220mm x Depth 125mm
Machine Weight
About 4.2kg
Purifier
Total water flowing volume: about 12000L
Purifying capacity: take away salty particle residue
Remove foul and bad odor
Max.Wate Temperature
For Continuous Usage
Power Cable Length
About 9 feet
To Next Page
Loading...