Purple Ladybug PRISMIC Star - Step 2: Form Star Arm; Step 3: Assemble Star Section; Step 4: Join Star Sections; Step 5: Form Another Star Arm

To Next Page

To Previous Page

VIDEO INSTRUCTIONS: WWW.PLBFUN.COM/PRISMIC

Join our community online:

WWW.PLBFUN.COM

VIDEO INSTRUCTIONS: WWW.PLBFUN.COM/PRISMIC

Join our community online:

WWW.PLBFUN.COM

Step 2

Step 5

Step 7

Step 4

Step 3

Step 6

Pick up the highlighted panel.

You should end up with something that looks like this:

Using the highlighted panel

Pick up the highlighted panel.

You should end up with something that looks like this:

Fold/bend the panel along the red and blue lines. Then

connect the highlighted Flat Edges to the highlighted Tabs

by matching up the holes (connected by lines below) and

fitting a locking pin in place (this will help determine how

far you need to fold/bend the lines).

Bend the red and blue edges accordingly and make the

connections in green.

Bend the red and blue edges accordingly and make the

connections in green.

Take the piece you completed in Step 5 and join it to the

main assembly by connecting the flat and tabbed edges

as indicated below.

Once you have this piece folded and connected, you

have completed one of the arms of the star. Set it aside

for now and move on to the next step.

Once you have this piece folded and connected, you

have completed another one of the arms of the star.

Once you have this piece folded and connected, you

have completed another one of the arms of the star.

Now, get the piece you completed in Step 2 and join

it to the one from Step 3 by connecting the flat and

tabbed edges as indicated below.

Bend the red and blue edges accordingly and make the

connections in green.