The provided document is an assembly and operation guide for an "Outdoor Bistro Set" from Purple Leaf. This set appears to consist of a chair and a small round table, designed for outdoor use.
Function Description
The Outdoor Bistro Set is designed to provide comfortable seating and a small surface for outdoor environments such as patios, balconies, or gardens. It serves as a compact and functional furniture solution for enjoying outdoor spaces, whether for a meal, a drink, or simply relaxing. The set is intended for personal use and is not specified for commercial applications.
Important Technical Specifications
Chair Components:
- Chair Back (A): Quantity 2
- Chair Seat (B): Quantity 2
- Left Leg (C): Quantity 2
- Right Leg (D): Quantity 2
- Leg Connector (E): Quantity 2
- 1/4" x 15 mm Bolt (F): Quantity 8
- 1/4" x 40 mm Bolt (G): Quantity 8
- Ø6.5 x 1.0 mm Washer (H): Quantity 32
- 1/4" Nut (I): Quantity 16
- Bolt Cover (J): Quantity 16
- Nut Cover (K): Quantity 8
- Hex Wrench (L): Quantity 1
- Hex Bolt Driver (M): Quantity 1
- Foot Cap - 1 (Factory Assembly): Quantity 8 (implied, as 4 per chair)
- Foot Cap - 2 (Factory Assembly): Quantity 8 (implied, as 4 per chair)
Table Components:
- Tabletop (A): Quantity 1
- Table Leg (B): Quantity 3
- Table Leg Connector (C): Quantity 1
- 1/4" x 15 mm Bolt (D): Quantity 3
- 6.5 x 1.0 mm Washer (E): Quantity 9
- Bolt Cover (F): Quantity 9
- 1/4" Nut (G): Quantity 3
- 1/4" x 30 mm Bolt (H): Quantity 6
- Hex Bolt Driver (I): Quantity 1
- Hex Wrench (J): Quantity 1
The assembly process for both the chair and the table involves securing various parts with bolts, washers, and nuts, and then covering the exposed hardware with bolt and nut covers for a finished look and protection. The use of specific tools like a hex wrench and hex bolt driver is indicated, which are included in the set.
Usage Features
The Outdoor Bistro Set is designed for ease of assembly and use.
- Assembly: The guide recommends 2 adults for chair installation, indicating that some parts might be cumbersome or require coordinated effort. The assembly steps are detailed with diagrams (Figure 1, Figure 2, Figure 3 for the chair; Figure 1, Figure 2, Figure 3 for the table) to guide the user.
- Chair Assembly:
- Unpack and identify all parts on a non-abrasive surface.
- Attach the chair back (A) to the chair seat (B) using 1/4" x 15 mm bolts (F), washers (H), and 1/4" nuts (I). Hand tighten initially.
- Insert the ends of the chair leg connector (E) into the ends of the left leg (C) and right leg (D).
- Attach the chair seat/chair back assembly to the chair leg assembly. This involves attaching the chair back to the rear arm and chair back, and the chair seat to the chair frame using 1/4" x 40 mm bolts (G), washers (H), and 1/4" nuts (I). Repeat for the opposite side.
- After making any necessary adjustments for alignment, fully tighten all nuts and bolts using the hex bolt driver and hex wrench. Cover striped bolts with bolt covers and nuts with nut covers.
- Table Assembly:
- Unpack and identify all parts on a non-abrasive surface.
- Attach the table legs (B) to the tabletop (A) using 1/4" x 15 mm bolts (D) and washers (E). Hand tighten a few revolutions only. Repeat for the remaining two legs.
- Insert the table leg connector (C) in the center of the three legs. Secure it by inserting two 1/4" x 30 mm bolts (H) through the two holes in the center of the leg and into the leg connector. Tighten a few revolutions only. Do not tighten completely. Repeat for remaining two legs.
- Make any adjustments to ensure parts are properly aligned. Fully tighten all nuts and bolts using the hex bolt driver and hex wrench. Cover bolts with bolt covers.
- Safety Precautions: The guide emphasizes several warnings and cautions:
- Retain instructions for future use.
- Read carefully before assembly.
- Check all parts and hardware against the item list.
- 2 adults are recommended for installation.
- Do not discard packaging until all parts and fittings are checked.
- Periodically check and tighten bolts to ensure proper functioning.
- Some parts may have sharp edges/corners; follow basic safety precautions to prevent injuries.
- CHOKE HAZARD: Small parts are included; keep away from children under 3 years old and pets during installation.
Maintenance Features
The maintenance of the Outdoor Bistro Set primarily focuses on ensuring structural integrity and longevity.
- Regular Bolt Checks: Users are instructed to "periodically check and tighten bolts" to ensure the chair works properly. This is crucial for safety and stability, preventing the furniture from becoming wobbly or unstable over time due to loosening fasteners.
- Warranty Information:
- Frames: Warranted to be free from defects in material and workmanship for 1 year from the purchase date. Damage from negligence is not covered.
- Bolts & Nuts: Warranted to be free from defects in material and workmanship for 1 year from the purchase date. Damage from exposure to chemicals (oils, spills, fluids) is not covered.
- Warranty Limitation: The warranty is for the original purchase order only and is non-transferable. Purple Leaf is responsible for the free replacement part, including shipping charges, for the 1-year warranty period.
- Warranty Exclusion: The warranty does not cover products subject to negligence, abuse, usage, or inappropriate installation. Purple Leaf reserves the right to explain warranty exclusions. The warranty automatically expires if the replacement item is applied and the 1-year warranty period has passed. Users are encouraged to contact Purple Leaf for warranty applications.
These maintenance guidelines highlight the importance of routine inspections and proper care to maximize the lifespan and safety of the bistro set. The warranty details provide assurance regarding manufacturing defects but place responsibility on the user for proper assembly, usage, and protection from damaging substances.
Need help?
General
To Next Page
