PWR S500 - Appearance and Key Descriptions; Coverage; Product Specification; Safety Precautions

ENG
41
1 Safety precautions
To prevent personal injury or damage to vehicles and/or the scan tool, read
this instruction manual rst and observe the following safety precautions at a
minimum whenever working on a vehicle:
• Always perform automotive testing in a safe environment, do not attempt to operate or
observe the tool while driving a vehicle.
• Operating or observing the tool will cause driver distraction and could cause a fatal accident.
• Wear safety eye protection that meets ANSI standards.
• Operate the vehicle in a well ventilated work area: Exhaust gases are poisonous.
• Put the transmission in PARK (for automatic transmission) or NEUTRAL (for manual
transmission) and make sure the parking brake is engaged.
• Keep the scan tool dry, clean, free from oil/water or grease. Use a mild detergent on a clean
cloth to clean the outside of the scan tool, when necessary.
1.1 Coverage
1.2 Product specication
1.3 Appearance and Key Descriptions
1. Supports vehicles for VW, AUDI, SKODA, SEAT etc .
2. Supports all VW diagnostic protocols: UDS, TP20, TP16, KWP2000 and KWP1281.
3. Supports all OBDII/EOBD protocols : VPW, PWM, ISO, KWP 2000 and CAN .
2.4’LCD, 320 X 240 pixels color screen
8-18V
-0°C-60°C (32-140°F)
-20°C-70°C (4-158°F)
Screen:
Operating Voltage:
Operating Temperature:
Storage Temperature:
1. LCD DISPLAY - lndicates test results. Backlit, 320 x 240 pixels display
2. [OK] BUTTON - Conrms a selection (or action) from a menu.
3. [ESC] BUTTON - Cancels a selection (or action) from a menu or returns to the
menu.
4. [LEFT] SCROLL BUTTON - ln the menu mode through the menu and sub menu
move to the left, when rolling in a data interface, use the left button can be moved
to the last screen.
5. [RIGHT] SCROLL BUTTON -ln the menu mode through the menu and sub menu
item move to the right, when rolling in the data interface, use the right button can
be moved to the next screen.
6. [UP] SCROLL BUTTON -ln the menu made through the menu and sub menu item
moving up. When retrieving data for more than a screen by moving up the screen
to the previous screen for more data.
7. [DOWN] SCROLL BUTTON - ln the menu made through the menu and sub menu
item moves down. When retrieving data more than one screen, by moving down
the screen to the next screen for more data.