Pyle PAH1 User Manual

THE BAROMETER
Maximum and Minimum
1. Press Button 0 to enter the
Memory mode.
2. The memory of max imum and
minimum barometer wi
ll be scro ll ed
on the display automatical ly.
3. To reset the memory, press and
hold Button B. At the
same ti me,
the memory for the hygrometer and
the thermometer wi
ll be reset al so.
4. Press Button 0 to quit or left It return
automatically to
Norma l Mode after
30 seconds .
The Atmospheric
Pressure
Bar Chart
1. Press Button 0 to enter the
Bar Chart Mode
2. The atmospheric pressure chart
records the atmospheric
changes
for the past 12 hours and it will be
scro ll ed on the di sp l ay automatica ll y .
•
The history hours are:
o H
= Current
• 1 H
= Past I hour
- 2 H
= Past 2 hours
- 3 H
= Past 3 hours
-6 H
= Past 6 hours
-
12 H = Past 12 hours
3.
To reset the records , press and hold
Button B.
4.
Press Button 0 to quit or left it retum
automatically to
Norma l Mode after
30 seconds.
_EIOIII'IIAX
r11D '~.6:
L-......:.. =- ..:.......; = ~ 01
tmI EIOIII' liN
f01 90BD: 01
-
O lD ,~:
<= :""":":=-- :""""::= !...l 01
THE ALTIMETER
• Press Button A to enter the Altimeter
mode.
Setting the Al titude
1. To keep a cheel< and re-adjust the
altimeter,
it will l ead to the most
accurate reading.
2. Press Button A to normal mode
and then hold Button Aagain, the
altimeter digits will start to flicker
3.
Press Button B to set and then
press Button A to confirm.
4. Repeat Step 3 to set your desire
digi
ts
Zeroing the Al titude
(Sea -level)
1. To re-setting the height at
sea -l evel, press Button A to
Normal Mode.
2. Ho ld Button A aga in until all digits
are reset to zero .
EIII
01

Pyle PAH1 Specifications

General

Stopwatch	Yes
Product color	Black, Silver