Pyle PAH1 User Manual

Maximum and Minimum
1. Press Button A to enter the
Memory mode.
2. The memory of maximum and
minimum a lti tude will be scro ll ed
on the di sp lay automat ically.
3. To reset the memory. press and
hold Button B. At the same time.
the
memory for the hygrometer
and
the thermometer will be reset
al
so .
4.
Press Button A to quit or left it
return automatica ll y to Normal
Mode after 30 seconds.
The Altimeter Bar Chart
1. Press Button A to enter the
Bar Chart Mode.
2. The altimeter bar chart records the
altitude changes for the past 12
hours and It will be scrolled on the
display automatically .
• The history hours
are:
o H = Current
- 1 H
= Past I h our
- 2 H = Past 2 hours
- 3 H
= Past 3 hours
- 6 H
= Past 6 hours
-12 H = Past 12 hours
3. To reset the records. press and hold
Button
B.
4. Press Button A to quit or left it return
automatically
to Normal Mode after
30 seconds.
10
. . . . .
. . . . .
01
• :.:.:.1. :.
.. - - ~ - - - 02
The Total Altitude Displacement
1. Press Button A to enter the
A lt imeter Normal Mode.
2.
To start a trip . press Button B to
start the trip timer and t hen the tota l
a
lt itude d is placement wi ll be
recorded automaticall
y.
3. To stop a trip . press Button B aga in
to stop the trip timer and then the
tota l al titude displacement wi ll be
stopped to count
4. To read the Total Al titude
, I ,
n
I
n
Displacement. press Button A to enter the Total Altitude
Displacement Mode and then press Button B to se lect the
tota l displacement for the gain (TOT.) orthe l oss ( TOT . ).
5.
Press Button A to quit or left it return automatically to Normal
Mode after 30 seconds.
Ho;gN
o
From 0 toO , (the gain TOT.)
Tot al altitude di sp lacement for the gain (TOT.) = dl +d2+d3
From
a to e , (the l oss TOT .. ),
Total altitude di
sp lacement for the loss (TOT.) = d5+dS+d7
01
01

Pyle PAH1 Specifications

General

Stopwatch	Yes
Product color	Black, Silver