Need help?Do you have a question about the Pyle PTHM20 and is the answer not in the manual?
General| Type | Electronic environment thermometer |
|---|---|
| Purpose | Indoor/outdoor |
| Display type | Digital |
| Display form factor | Rectangular |
| Accuracy | 0.5 °C |
| Temperature measurement range | -20 - 80 °C |
| Temperature measurement units | F, °C |
Weight and Dimensions| Depth | 33.01 mm |
|---|---|
| Width | 228.09 mm |
| Height | 55.11 mm |
| Weight | 3071 g |
Humidity & Temperature Semiconductor Sensor inside.
4-1/2 dual digits LCD display with units of °C, °F, %RH, dew point, wet bulb.
Press MAX/MIN button to enter MAX, MIN Recording mode.
Press °F, °C, Dew Point, Wbt select Button to enter select °F, °C, Dew Point, Wet Bulb Measurement.
Turn the meter power ON/OFF.
Press Hold/backlight Button to enter hold function or turn on/off backlight.
Location for battery installation and replacement.
To Next Page
