Pyle PAMP1000 User Manual

Your new PYLE HOME PAMP Amplifier
gives you the power and versatility you need in a professional sound system.
The wide frequency response of it handles easily amplification of voice and music.
The signal sensing of dual inputs turns the amplifier on automatically when music
is sensed on RCA inputs. The activation of Line 1 input that will override Line 2
input makes the amplifier perfectly as a zone amplifier for a multiroom distribution
audio system.
FEATURES AND CONTROLS

Pyle PAMP1000 Specifications

Power

input impedance	20 k-Ohms
continuous output power stereo mode 8 Ohms	60 Watts x 2
continuous output power stereo mode 4 Ohms	70 Watts x 2
maximum power stereo mode 8 Ohms	65 Watts x 2
maximum power stereo mode 4 Ohms	80 Watts x 2
maximum power bridged mode 8 Ohms	130 Watts
maximum power bridged mode 4 Ohms	160 Watts
THD at rated output power	0.1%
power requirement	120V AC 60Hz/230V AC 50Hz
power fuse 110-120V	T 4AL 250V
power fuse 220-240V	T 2AL

Audio

frequency response	10 Hz to 50 kHz
signal to noise ratio A-weighted	100 dB
speaker impedance stereo	4-16 Ohms
speaker impedance bridged	8-16 Ohms

Weight and Dimensions

dimensions	16.53 x 2.36 x 8.26 inches (420 x 60 x 210 mm)
weight	9.08 lbs (4.12 kg)