Pyle PT510 User Manual

MODEL:PT510 PA AMPLIFIER
240 Watt Public Address Power Amplifier, w/ 70V Output & Mic
Talkover, USB/SD Card MP3 Player, Built-in FM Radio

Pyle PT510 Specifications

General

Frequency Response	20Hz-20kHz
Impedance	8 Ohm
Signal-to-Noise Ratio	≥75dB
Inputs	RCA
Channels	2
Power Supply	110V/220V

Summary

Features and Controls

Front Panel Overview

Details the controls and indicators on the front panel of the PT510 amplifier.

Rear Panel Overview

Describes the connections and features located on the rear panel of the PT510 amplifier.

Media Player Controls

Master Volume and Power

Describes the master volume adjustment and the main power switch.

Rear Panel Inputs and Outputs

Voltage Selection

Explains the 110V/220V voltage switch for different region operation.

Speaker Connections

Speaker Impedance Basics

Explains the importance of total speaker impedance and matching for equal volume.

Single Speaker System

Series Speaker Connection

Parallel Speaker Connection

70V/100V Transformer Connection

Specifications

Output Power and THD

Details output power ratings and Total Harmonic Distortion (THD) at various frequencies.

Frequency Response and Sensitivity

Power Requirements and Fuse