Need help?Do you have a question about the Pyle PAMP1000 and is the answer not in the manual?
Power| input impedance | 20 k-Ohms |
|---|---|
| continuous output power stereo mode 8 Ohms | 60 Watts x 2 |
| continuous output power stereo mode 4 Ohms | 70 Watts x 2 |
| maximum power stereo mode 8 Ohms | 65 Watts x 2 |
| maximum power stereo mode 4 Ohms | 80 Watts x 2 |
| maximum power bridged mode 8 Ohms | 130 Watts |
| maximum power bridged mode 4 Ohms | 160 Watts |
| THD at rated output power | 0.1% |
| power requirement | 120V AC 60Hz/230V AC 50Hz |
| power fuse 110-120V | T 4AL 250V |
| power fuse 220-240V | T 2AL |
Audio| frequency response | 10 Hz to 50 kHz |
|---|---|
| signal to noise ratio A-weighted | 100 dB |
| speaker impedance stereo | 4-16 Ohms |
| speaker impedance bridged | 8-16 Ohms |
Weight and Dimensions| dimensions | 16.53 x 2.36 x 8.26 inches (420 x 60 x 210 mm) |
|---|---|
| weight | 9.08 lbs (4.12 kg) |
To Next Page
