www.PyleUSA.com
If you want to switch back to manual mode from auto mode, stop
recording(or playback) to standby mode (blue indicator keeps on), long
press button 3~5 seconds, till you see the indicator from blue to
green, or simply power o PCASRSD17, then power on again, it will load
at default----manually mode .
3. Use AUX port, you can also record music from other sources with an
3.5mm audio cable (such as: radio, MD players, anything with audio line
out)
4. Known problems in Auto mode:
Due to the auto function is based detecting the level of music: when the
level is lower than the setting in rmware, PCASRSD17 will take it as
space between two songs, so there will be chance to meet following
situations:
1. If there is a long pause in a song, PCASRSD17 may take it as two
songs, and save 2 les for it.
2. If the space between two songs is too short which PCASRSD17
cannot detect, PCASRSD17 will take them as one song, and save the
two songs in one le.
When you come across this situation, you can use the Audacity software
to editing them.(nd the link following)
Note: We do not suggest to power o (unplug the power supply) or
unplug the USB ash during recording, even we make a design that the
device will automatically save the MP3 le for previously recording
when power o or USB ash unplugged during recording.
If you want to edit your recorded MP3 les, you can use free software ---
Audacity, download from: http://audacity.sourceforge.net
5. Playback
This device has playback function so you can check and listen to the
recorded le.
At standby mode, press playback button, device will start to play the
recorded music the indicator will be slow ashing. Press playback button
again, will stop playback and back to standby mode.
4
To Next Page
Loading...
Need help?
General