BACK PANEL
10.USB Charge Port & USB Reader Function
USB port charges for smartphone, and also for USB reader
function.
11.SD/MMC Socket for playing SD/MMC cards.
12.Bluetooth Antenna
The antenna is best receiving for Bluetooth operation.
13.RCA L/R LINE Input
-Let you connect to the desired LINE input sources.
14.Push Type Speaker L/ R Terminals
Let you easily connect the speakers' wires directly to
the amplifier
15.110V/220V Switch
According to power voltage, push this button to the
correct station of the 110V or 220V.
16.AC IN Power Cord
-Connect to AC 110V/60Hz or 220V/ 50Hz
17.Fuse
The amplifier uses a fuse for protection against surges
and short circuit. If the amplifier suddenly turn off and
will not turn on, check the fuse. If necessary, replace
it with a 1- amp, 250-volt, fast-acting, 5x20mm fuse
(not supplied)
-
-
-
-
-
12
13 14 15
16
17
1
2
3
4
5
6
7
8
9
10
11
1.Power Standby Button
2.Play/ Pause Button
3.Equilizar Button
4.Repeat Song Button
5.Mode: Menu Control Button
Press it for audio input selection like Bluetooth/USB/SD/LINE IN,etc.
6.Mute Button
7.Previous Song Button
8.Next Song Button
9.Volume - & Volume + Buttons
10.USB/ SD Switch Button
11.Number Buttons for Song Selection
REMOTE CONTROL FUNCTION
To Next Page
Loading...
Need help?
General
