Fig5
Batteries
Please use 6 alkaline AA batteries.
1. Press the “key” on the battery cover in the direction of the arrow, pull off the battery
cover.( See fig 6)
Fig6
2. Insert the 6 AA batteries into the compartment as indicated by the polarity symbols marked
inside the compartment. (See fig.7)
Fig7
3 Align the battery cover with battery port (the UP-side is facing up), then replace the cover.
6 alkaline batteries will operate for about 40 hours. If you don’t use detector for a week or
more, please remove the batteries from the battery box.
To Next Page
Loading...