Quick Start:
To help you master how to operate the MD6009 metal detector quickly, we
suggest that you should read the quick start carefully, and practice indoors. When you
are familiar with the detector, you can hunt for the treasures just about anywhere.
1. Prepare with an assortment of metal samples
an iron nail
a pull-tab and a five cents nickel coin
a 1 cent zinc coin(after 82 version)
a 25 cent silver coin
2. Lay the metal detector properly
In order to avoid the outside metal interference to the detector, be sure to lay the
metal detector properly.
Place the detector on a wooden or plastic table. Let the search coil extend over
the table edge more than 5 inches, keep the flat part pointing upwards (Fig.9).
Figure.9
Please take off your watch, ring or other metal objects on your hand or arm. Keep
the detector away from the wall, floor and other metal objects.
Be sure to keep the detector away from the light, TV, computer and mobile
telephone, which can cause electro-magnetic interference.
3. Turn on
Turn on the power supply, and set the volume knob to the mid position.
To Next Page
Loading...