PHPNC85 - High-Fidelity Active Noise Canceling Headphones
Thank you for purchasing the Pyle High-Fidelity Active Noise Canceling Headphones. These headphones combine the comfort of
traditional high performance headphones with active noise control, reducing the effects of unwanted ambient sounds for the
increased audio and listener experience. Enjoy the headphones when you work, fly or when you just want to relax.
Once the headphones are on, locate the power switch on the right ear-cup and press forward to the ‘ON’ position. The Blue
battery light indicator will illuminate and the noise canceling function is activated. Adjust the levels of noise cancelation using the
HI/LO slider switch found at the base of the right ear-cup.
When the power switch is set to OFF, the noise cancelling function ceases and the unit can be used as a traditional set of
premium headphones.
NOTE: Batteries are required in order for the noise cancellation function to work.
Connecting the Headphones
Open the protective rubber housing situated on the lower side of the
right ear-cup. Gently push the 3.5mm headphone plug all the way into
the connector opening and then connect the headphone cord into the
port of your chosen audio sound system. If the plug on the audio cable
does not fit use the adaptor for 6.3mm ports.
To connect to in-flight entertainment systems equipped with
dual output connectors, use the flight plug adaptor provided.
NOTE: Do not use with airline onboard sound systems under the
following conditions:
• Whenever the cabin crew announces that electronic devices are
prohibited
• When the use of privately owned headphones is prohibited inside the
plane