www.PyleUSA.com4
As a disc is rotated at a high speed, it is dangerous to play a broken or deformed
disc. Do not apply any tape or glue to the disc as this could lead to damage of
the player. Should there be a strange noise or vibration whilst playing, if the
picture or sound skips, or if the picture is distorted, stop the player immediately.
Remote Control Function Keys
Note: Use 2 x 'AAA' batteries (Don't included). Keep away from children.
1. Standby/Power on/o switch: Press to open/close
the unit power. In this mode, he unit is still consuming
a small amount of power.
OPEN/CLOSE: Open/Close the disc tray.
2. Mute: Press to mute or unmute the sound
Zoom: Magnies/Shrinks the screen image size
Angle: Chose the dierent angles in the same
image (Only support have multi-angle discs)
Mode: Press to choose DVD/USB/FM/Line in (AUX)/
BT modes
3. SUB/COPY: Press subtitle button to displays the
subtitles in dvd mode (Only supports multi-subtitle
discs) Copy music contents from loaded CD disc to
inserted USB drive
Clear: When using PROGRAM feature, press CLEAR
to clear the input number.
PROGRAM: First, press PROG to enter program
status. Then, press to select the item.
Press 0 to 9 to specify the 2-digit order (To reset,
press clear).
Press to select Start, press OK to start
programed playback. Press STOP twice to clear
the whole proram.
LED: Press to Turn ON/OFF the speaker light
(Remote or unit Button). In standby mode, the LED
light is OFF in default. In Power on mode, the LED
light will be turned on automaticaly.
1
2
3
4
5
6
7
8
To Next Page
Loading...