and slide it into the receiving slot in back of thedisplay monitor assembly.
This metal buckle should slide in and up to the monitor assembly.
3. Set the desired position/height of the buckle into the m
onitor assemb
ly.
4. Tighten the clamp
‐style knob in the back of the stand mount to secure
the m
onitor in the desired position.
5. The angle / tilt position of the stand m
o
unt is also adjustable. Located
toward the base of the stand m
ount is another
clamp‐style knob.
Discover other cameras & driver safety on our website.
To Previous Page
Loading...
