Tire pressure Setting
Pressing the MODE key while inputting your license plate number (license interface) will allow you to switch
between letters and numbers. Press the UP/DOWN key to select 0-9 or A-Z. The OK key is used to confirm; press
the MENU key to save and exit the license setting interface.
Connecting to the Computer
Video and Photo Download:
1. When the USB cable is connected to your computer, the DVR‟s red indicator light will be lit (steady). A screen
will pop up that display “Mass Storage and PC Camera”.
2. After you click Mass Storage, the DVR screen will turn blue. This means that it is working and the Micro SD
card disk can now be recognized by your computer.
3. Use your computer to browse and manage the files (download, copy, move, delete, etc.)
4. Press and hold the ON/OFF key to power it off and remove the USB cable from your computer.
5. Press the ON/OFF key to power off the DVR and begin charging. The red indicator light will be lit (steady).
Note: Improperly operating this DVR (unplugging from computer without turning it off, etc.) may cause the
DVR/SD Card to crash. To troubleshoot your DVR if it has just crashed, use a small, hard object to press the
reset key on the side of the DVR (Item 12 of the Schematic).
To Next Page
Loading...
Need help?
General
