Pyle PLDVRCAMG37 User Manual

Using the PLDVRCAMG37 Recorder
Battery Charging
There are two methods for battery charging:
1. Use a USB cord to connect the machine with a computer
for charging
2 Use the accessory vehicle-mounted power source for
charging.
In the whole process of charging, charging indicator lights up
in red. When charging is finished, indicator automatically
extinguishes. The whole charging process takes about 240
minutes.
Insert Memory Card
Insert Micro SD memory card into the slot in accordance with
the indicating direction on the machine body until you hear a
"Ka" sound.
Remove Card: Push the memory card inside and the card will
pop up, then you can now remove the memory card.
Notice:
When using the memory card for the machine for the first
time, since the formatting of the memory card is not
compatible with the machine, you must use the attached tool
software ( H " "~~ ) to format the memory card (Formatting of
the memory card by computer is not supported). Formatting
will permanently delete all the data on the memory card,
including the protected image, which can not be restored.
Therefore, before formatting the memory card, please back
up important data.
If you can't use the machine to format the memory card
format, please use attached software () using a
computer.
www.PyleLISA.com
5

Pyle PLDVRCAMG37 Specifications

General

Brand	Pyle
Model	PLDVRCAMG37
Category	Dash Cameras
Language	English