www.pyleaudio.com
User Manual
1. Place the larger stand pole onto the hole of the round base, and
screw to tighten it onto the base bottom.
2. Loosen the brace on the pole, to allow adjustment of upper
stand pole and to the desired height.
3. Tighten the brace firmly to allow proper and secure mic holding.
4. Loosen the round knob clutch to adjust the angle of the boom.
Then tighten the round clutch securely afterwards.
5. Loosen the small knob to adjust the boom to desired length and
tighten it securely afterwards.
6. Insert and tighten the mic holder on the top of the boom.
Headquarters: 1600 63
rd
Street
Brooklyn, NY 11204 – USA
Toll Free: (800) 444 – 5671
Tel: (718) 236 – 8000 Fax: (718) 236 – 2400
www.pyleaudio.com
PMKS15 - Micro
hone Stand
Need help?
General
