Pyle PMKS22 User Manual

www.pyleaudio.com
User Manual
1. Fold out the wheeled tripod legs until they are fully extended.
2. Loosen the tripod clutch and adjust the pole to desired height.
Tighten the clutch securely afterwards.
3. Loosen the knob to adjust the height of the upright pole and
tighten the knob afterwards.
4. Loosen the easy-to-use, Euro-style boom clutch to adjust the
length and the angle of the boom. Tighten the clutch securely
afterwards.
5. Place and tighten the mic holder on the top of the boom.
Headquarters: 1600 63
rd
Street
Brooklyn, NY 11204 – USA
Toll Free: (800) 444 – 5671
Tel: (718) 236 – 8000 Fax: (718) 236 – 2400
www.pyleaudio.com
PMKS22 - Micro
p
hone Stand

Pyle PMKS22 Specifications

General

Type	Microphone Stand
Material	Steel
Height Adjustment	Yes
Base Type	Tripod
Color	Black
Boom Length	30''

Summary

PMKS22 Microphone Stand User Manual

Setup: Extending Tripod Legs

Instructions to unfold the microphone stand's wheeled tripod legs until fully extended.

Setup: Adjusting Pole Height

Guide to loosening the tripod clutch, adjusting the pole height, and tightening securely.

Setup: Adjusting Upright Pole

Instructions for loosening the knob to adjust the upright pole's height and re-tightening.

Setup: Adjusting Boom Clutch

Steps to loosen the Euro-style boom clutch for length/angle adjustment and secure tightening.

Setup: Attaching Mic Holder

Procedure for placing and tightening the microphone holder onto the top of the boom.