www.pyleaudio.com
User Manual
1. Place the bigger pole onto the hole of the round base, and have
the screw to tighten it on the base bottom.
2. Clutch the Quick-Release Handle and adjust the pole to desired
height.
3. Place and tighten the mic holder on the top.
Headquarters: 1600 63
rd
Street
Brooklyn, NY 11204 – USA
Toll Free: (800) 444 – 5671
Tel: (718) 236 – 8000 Fax: (718) 236 – 2400
www.pyleaudio.com
PMKS40 - Micro
hone Stand
Need help?
General
